10 Best Tracker Knife Blanks

Best Tracker Knife Blanks Quick Features

1. ColdLand Knives Handmade Damascus Steel Tracker Blank Blade with Free Leather Sheath for Knife Making Supplies ZB31L

 

2. ColdLand Knives, Damascus Blank Blade Tracker Hand Forged 10.00 inches for Hunting Knife Making Supplies ZB106

  • You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you.
  • Solidly built for tough use. Long lasting sharp edge. Hand forged by using 1095 & 15N20 steels. Over 260 true layers of Damascus steel. Heat treated. Hardness: 58-60 HRC on Rockwell Scale. Will long last for several years (lifetime if handled with care).
  • NOTE: This is our stock photo. You will receive different Damascus pattern as every Damascus Blade is unique in the world. The holes in the handle can be small or big in diameter and can be found at different places on the handle (you don’t need to use all holes to make a knife). TIP: If your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes.
  • DIMENSION: See photos for Dimensions. We don’t provide any directions on how to make a knife. You can search on the web i.e., “how to make a knife from a blank blade”.
  • We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. Wash your knife and apply a thin layer of oil on your blade/knife after each use. For long term storage; store your knife and sheath separately. Please message us if you have any issue with your purchase.

 

3. Damascus Steel Full Tang Tracker Blank Blade BB-0005 Custom Handmade for Knife Making

  • Stunning Unquie Tracker Knife blade blank for the do-it-yourself knife maker , Original ONLYl from ” Sharp Forest Knives-Official “

 

4. 1095 High Carbon Steel Tracker Knife Blank Blade Hunting Skinning Skinner 1095HC

  • Note: We also sell a high quality leather sheath that fits this item (sold separately).
  • Dimensions: 9.5 inches Approximate Overall Length, 4.5 inches Approximate Cutting Edge Length, 4.5 inches Approximate Handle Length, 2 inches Widest Part of Blade, 1.2 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch)
  • High quality 1095HC (high carbon) steel construction.
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
  • High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention.

 

5. Whole Earth Supply Brown Leather Tracker Sheath Fixed Blade Knife Hunting Skinning Blanks Knives

  • Important: Please ensure this sheath will fit ALL dimensions of your knife before purchasing:
  • Fits a tracker style blade up to 5 inches long, up to 2.1″ wide (2.125″ wide blades are a tight fit). Fits up to 0.75″ thick handle maximum (Thicker handles are not supported. The button will not snap on handles which are too thick).
  • Sheath is 8.25 inches in total outside length, 2″ wide at opening.
  • 1/8″ thick genuine buffalo leather. Belt loop on back fits up to 1 1/2″ width belt. This is a right-handed draw sheath when worn on the left hip, or a left-handed draw sheath when worn on the back.
  • This sheath fits all the tracker blanks and knives we sell. Tracker knives come in many shapes and sizes. Please ensure the dimensions stated above fit your blade before purchasing.

 

6. Whole Earth Supply Hammered D-2 Steel Tracker Knife Making Blank Blade Hunting Skinning Skinner D2 Knives

  • Note: We also sell a high quality leather sheath that fits this item (sold separately).
  • Dimensions: 9.5 inches Approximate Overall Length, 4.5 inches Approximate Cutting Edge Length, 4.5 inches Approximate Handle Length, 2 inches Widest Part of Blade, 1.2 inches Widest Part of Handle, Approximately 4-5mm Thick (3/16 inch)
  • High quality D-2 steel construction. Hammered blade sides for unique look.
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
  • D-2 steel is more corrosion resistant than high carbon steel, while holding a better edge than stainless

 

7. 1095 High Carbon Steel Tracker Knife Blank Blade Hunting Skinning Skinner 1095HC Black Powder Coated

  • Note: We also sell a high quality leather sheath that fits this item (sold separately).
  • Dimensions: 9.5 inches Approximate Overall Length, 4.5 inches Approximate Cutting Edge Length, 4.5 inches Approximate Handle Length, 2 inches Widest Part of Blade, 1.2 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch)
  • High quality 1095HC (high carbon) steel construction. Coated in protective black powder coating.
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
  • High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention.

 

8. 1095 High Carbon Hunting Knife Tracker Knives Sheath Black Powder Micarta

  • 1095 High Carbon Hunting Knife Tracker Knives Sheath Black Powder Micarta
  • Dimensions: 9.5 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 4.5 inches Approximate Handle Length, 1.825 inches Widest Part of Blank, Approximately 5mm Thick (3/16+ inch)
  • High quality 1095 steel construction. Includes high quality black leather sheath. This is a right-handed-draw sheath when worn on your belt on your belt at your back (referred to as scout style).
  • Handsome black powder coating to offer protection against rusting.
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge.

 

9. Damascus Steel Tracker Knife Blank Blade, 11 inches Long Hand Forged fire Pattern Tracker Knife, Camping Knife with 3 Pin Hole, Over 6 inches Cutting Edge, 4.5″ Scale Space

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade
  • 4.5″ long Scale space with 3 Pin holes for extra strength of scale.
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel.
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel

 

10. Whole Earth Supply Ram Horn, Ladder Damascus Tracker Knife Hunting Knives Handle with Wood Inlay Blank +Sheath

  • Ladder Damascus Tracker Knife Hunting Knives Ram Horn Handle with Wood Inlay Blank +Sheath
  • Dimensions: 9.5 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 4.5 inches Approximate Handle Length, 1.825 inches Widest Part of Blank, Approximately 5mm Thick (3/16+ inch)
  • High quality 1095 steel construction. Includes high quality brown or black leather sheath. This is a right-handed draw sheath when worn on the belt at the back (scout style).
  • Ladder damascus pattern
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge.

 

 

Last update on 2022-12-07 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment